Loading ...
Loading ...
Loading ...
Instrument setup
R&S
®
MXO 5 Series
97User Manual 1802.3369.02 ─ 02
Remote command:
MMEMory:AUTonaming:TIME on page 456
Index
If enabled, inserts an index.
Remote command:
MMEMory:AUTonaming:INDex on page 456
Enable autosave
Enables the automatic saving of the waveform. With "Autosave interval", you can
define the time interval for the automatic saving.
Remote command:
MMEMory:AUSave:ENABle on page 457
MMEMory:AUSave:INTerval on page 457
Default path for all file operations
Defines the path that is displayed in the file selection dialog box for loading and storing
operations. On the instrument, all user data is written to /home/storage/userData.
You can create subfolders in this folder. The path to a USB storage device
is /run/media/usb/.
To switch the directory quickly, double-tap the path button. Use the symbols on the left
of the file explorer box to change the directory.
Remote command:
MMEMory:AUTonaming:DEFaultpath on page 458
Reset path
Resets the default file path to the factory default.
Remote command:
MMEMory:AUTonaming:RESPath on page 458
MMEMory:AUTonaming:RESall on page 458
5.8.1.2 Defining default file paths and names
When a save or load operation is performed, a default file name and path is provided.
You can configure which path is used and how the file name is generated. In the file
selection dialog box, you can change the folder and name as desired.
To define the default file path
1. Tap "Menu" > "Settings".
2. Select the "Save/Recall" tab.
3. Select the "Autonaming" tab.
4. Double-tap the path button.
The directory selection dialog box is opened.
Save / recall
Loading ...
Loading ...
Loading ...