Loading ...
Loading ...
Loading ...
Measurements
R&S
®
MXO 5 Series
190User Manual 1802.3369.02 ─ 02
Remote command:
CURSor<cu>:TRACking[:STATe] on page 582
Place on display
Resets the cursors to their initial positions. Reset is helpful if the cursors have disap-
peared from the display or need to be moved for a larger distance.
9.1.3.2 Advanced settings
Access: Cursor key > "Advanced" tab
The settings in the "Advanced" cursor tab configure the behavior and display of cursor
lines, and labels for the lines.
The cursor style and position of the measurement results is defined in the "Settings" >
"Appearance" > "Cursor" dialog box.
X, Y
Couple the horizontal or vertical cursor lines so that the distance between the two lines
remains the same if one cursor is moved. "X" couples the vertical cursor lines, and "Y"
couples the horizontal cursor lines.
Remote command:
CURSor<cu>:XCOupling on page 582
CURSor<cu>:YCOupling on page 583
Show in all diagrams
Shows the enabled cursor measurements in all active diagrams of the same (time/
spectrum) domain.
Cursor measurements
Loading ...
Loading ...
Loading ...