Loading ...
Loading ...
Loading ...
Measurements
R&S
®
MXO 5 Series
207User Manual 1802.3369.02 ─ 02
9.2.5.2 Measurement type specific settings
You can define additional parameters for some measurements.
Access: "Menu" > "Measurement" > "Setup" tab > Add measurement > Select mea-
surement
Specific type
Selects the type of measurement that you want to define the settings for.
Source
Sets the source of the measurement.
Remote command:
MEASurement<mg>:SOURce on page 558
Reference levels
Selects the set of reference levels that is used for the measurement (RL1, RL2...), and
for the selected source. Each source of the measurement can have its own reference
level set.
Only the numbers of defined reference level sets are listed. Define the reference level
set before you select it, see Chapter 9.2.3, "Reference level", on page 199.
Remote command:
MEASurement<mg>:REFLevel<sc>:REFerence on page 563
Gate
Selects the gate that is used for limiting the measurement range. Define a gate before
you select it, see Chapter 9.2.2, "Gate settings for measurements", on page 197.
Automatic measurements
Loading ...
Loading ...
Loading ...