Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
535User Manual 1802.3369.02 ─ 02
Usage: Setting only
Asynchronous command
Manual operation: See "Clear" on page 178
REFCurve<rc>:NAME <Name>
Defines the name of the reference waveform file to be loaded, saved or deleted.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<Name>
Usage: Asynchronous command
REFCurve<rc>:OFFSet <VerticalOffset>
The vertical offset moves the reference waveform vertically. Enter a value with the unit
of the waveform.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<VerticalOffset> Range: -1E+26 to 1E+26
Increment: 1E-06
*RST: 0
Default unit: V
Usage: Asynchronous command
Manual operation: See "Vertical offset" on page 181
REFCurve<rc>:OPEN
Loads the reference waveform file selected by REFCurve<rc>:NAME on page 535.
Note that reference waveforms can be loaded only from .ref files.
Suffix:
<rc>
.
1...8, index of the reference waveform
Usage: Event
Asynchronous command
Manual operation: See "Recall" on page 178
REFCurve<rc>:RESTore
Applies the original settings of the reference waveform to the horizontal and vertical
settings of the selected waveform.
Waveform analysis
Loading ...
Loading ...
Loading ...