Loading ...
Loading ...
Loading ...
Waveform generator (option R&S MXO5-B6)
R&S
®
MXO 5 Series
402User Manual 1802.3369.02 ─ 02
Remote command:
WGENerator<wg>:ARBGen:NAME on page 775
WGENerator<wg>:ARBGen:OPEN on page 775
15.2 Synchronize settings
Access: "Menu" > "Apps" > "Gen1" > "Synchronisation" tab.
Synchron start
Selects, which signals generated from the waveform generator are synchronized.
Selecting one of the sync options indicates that the first samples of those signals are
generated at the same time, irrespective of if the generators are on or off. Selecting
one of the coupling options automatically syncs the signals generated by the two wave-
form generators.
Remote command:
GENerator:SYNC[:COMBination] on page 780
Generator enable
Enables the coupling of the generators, with the selected set of parameters: amplitude
and frequency.
Remote command:
WGENerator<wg>:COUPling:STATe on page 779
Frequency parameters
Couples all frequency parameters of "Gen1" and "Gen2". The values are taken from
the currently selected generator.
You can still change the other settings of the generators independently.
Synchronize settings
Loading ...
Loading ...
Loading ...