Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
671User Manual 1802.3369.02 ─ 02
Usage: Asynchronous command
Manual operation: See "R/W bit" on page 319
TRIGger:I2C:ACONdition <AddrOptor>
Sets the operator to set a specific address or an address range. The address values
are set with TRIGger:I2C:ADDRess and TRIGger:I2C:ADDTo.
Parameters:
<AddrOptor> EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
*RST: EQUal
Usage: Asynchronous command
TRIGger:I2C:ADDRess
<Address>
Triggers on the specified address, or sets the start value of an address range depend-
ing on the condition set with TRIGger:I2C:ACONdition.
Parameters:
<Address> List of comma-separated values
Usage: Asynchronous command
Manual operation: See "Address" on page 319
TRIGger:I2C:ADDTo <AddressTo>
Sets the end value of an address range if the condition is set to an address range with
TRIGger:I2C:ACONdition.
Parameters:
<AddressTo> List of comma-separated values
Usage: Asynchronous command
Manual operation: See "Address" on page 319
TRIGger:I2C:ADNack <AddressNack>
Triggers if the address acknowledge bit is missing - no target recognizes the address.
Parameters:
<AddressNack> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "No Ack conditions" on page 319
Protocols
Loading ...
Loading ...
Loading ...