Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
781User Manual 1802.3369.02 ─ 02
For information on structure, hierarchy, and contents of the status registers, see Chap-
ter 16.5, "Remote control - status reporting system", on page 418.
● General commands...............................................................................................781
● STATus:OPERation register..................................................................................781
● STATus:QUEStionable registers........................................................................... 782
● Reading out the CONDition part........................................................................... 784
● Reading out the EVENt part..................................................................................785
● Controlling the ENABle part.................................................................................. 785
● Controlling the negative transition part..................................................................786
● Controlling the positive transition part...................................................................787
● Programming tips and examples...........................................................................788
17.19.1 General commands
STATus:PRESet
Resets the status registers.
All PTRansition bits are set to 1, i.e. all transitions from 0 to 1 are detected.
All NTRansition bits are set to 0, i.e. a transition from 1 to 0 in a CONDition bit is
not detected.
All EVENt bits are set to 0.
The ENABle bits of STATus:OPERation and STATus:QUEStionable are set to 0,
i.e. all events in these registers are not passed on.
Usage:
Setting only
SCPI confirmed
17.19.2 STATus:OPERation register
STATus:OPERation commands provide information on the activity of the instrument.
See also: Chapter 16.5.3.3, "STATus:OPERation register", on page 423.
STATus:OPERation:CONDition?......................................................................................781
STATus:OPERation[:EVENt]?..........................................................................................781
STATus:OPERation:ENABle............................................................................................782
STATus:OPERation:CONDition?
STATus:OPERation[:EVENt]?
The CONDition command returns information on actions the instrument is currently
executing. The contents of the register is retained.
The EVENt command returns information on actions the instrument has executed
since the last reading. Reading the EVENt register deletes its contents.
Status reporting
Loading ...
Loading ...
Loading ...