Loading ...
Loading ...
Loading ...
Waveform analysis
R&S
®
MXO 5 Series
181User Manual 1802.3369.02 ─ 02
Set to original
Available, if "Mode" = "Independent".
Restores the original vertical settings of the reference waveform (vertical scale, posi-
tion, and offset).
Remote command:
REFCurve<rc>:TOORiginal on page 540
Vertical scale
Available, if "Mode" = "Independent".
Sets the vertical scale, which defines the displayed amplitude of the selected wave-
form.
The unit of the reference is the same as the unit of the source waveform.
Remote command:
REFCurve<rc>:SCALe on page 537
Vertical offset
The vertical offset moves the reference waveform vertically. Enter a value with the unit
of the waveform.
Remote command:
REFCurve<rc>:OFFSet on page 535
Vertical position
Available, if "Mode" = "Independent".
Moves the reference waveform up or down in the diagram.
Remote command:
REFCurve<rc>:POSition on page 538
8.4.2.4 Reference waveform rescale
Access: [Ref] key > "Rescale" tab
Reference waveforms
Loading ...
Loading ...
Loading ...