Loading ...
Loading ...
Loading ...
Measurements
R&S
®
MXO 5 Series
188User Manual 1802.3369.02 ─ 02
Cu1/Cu2
The settings for each cursor measurement (or cursor set) are configured on separate
tabs. For each cursor set, a horizontal pair of cursors, a vertical pair of cursors, or both
can be displayed.
Show cursor
Enables the selected cursor measurement.
Remote command:
CURSor<cu>:STATe on page 579
Cursor style
Defines how the cursor is displayed in the diagram.
"Lines"
The cursors are displayed as lines.
"Line & Rhombus"
The cursors are displayed as lines. The intersections of the cursors
with the waveforms are displayed by rhombus-shaped points.
"VLine & Rhombus"
Vertical line and rhombus: the cursors are displayed as vertical lines.
The intersections of the cursors with the waveforms are displayed by
rhombus-shaped points.
"Rhombus"
The intersections of the cursors with the waveforms are displayed by
rhombus-shaped points.
Remote command:
CURSor<cu>:STYLe on page 587
Type
Defines the cursor type to be used for the measurement.
"X" (vertical cursors )
Both vertical cursor lines are set automatically to the trigger position,
and you can reposition them manually.
"Y" (horizontal cursors)
Horizontal cursors are positioned automatically along the waveform
and can be adjusted manually.
"X&Y" (both vertical and horizontal cursors)
Horizontal cursors are positioned automatically along the waveform
and vertical cursors are set to the trigger position. You can reposition
all cursor lines manually.
Remote command:
CURSor<cu>:FUNCtion on page 579
Second source, Source 2
Enables and selects a second source for the cursor measurements. If enabled, the
second cursor lines Cu2 measure on the second source. Using a second source, you
can measure differences between two channels with cursors.
Cursor measurements
Loading ...
Loading ...
Loading ...