Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
689User Manual 1802.3369.02 ─ 02
Parameters:
RXSource C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 | D0 | D1 | D2 | D3 | D4 | D5
| D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15 | M1 | M2
| M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4 | R5 | R6 | R7 |
R8
Usage: Asynchronous command
Manual operation: See "Source: Tx, Rx" on page 328
SBUS<sb>:UART:RX:THReshold <Rx threshold>
Sets a user-defined threshold value for the Rx line.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Rx threshold>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 330
SBUS<sb>:UART:SBIT <StopBits>
Sets the number of stop bits: 1 or 1.5 or 2 stop bits are possible.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<StopBits> B1 | B15 | B2
*RST: B1
Usage: Asynchronous command
Manual operation: See "Stop bits" on page 329
SBUS<sb>:UART:SSIZe <DataBits>
Sets the number of data bits of a word in a range from 5 bits to 8 bits. If no parity bit is
used, then 9 data bits are possible.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<DataBits> Range: 5 to 9
Increment: 1
*RST: 8
Usage: Asynchronous command
Manual operation: See "Data bits" on page 329
Protocols
Loading ...
Loading ...
Loading ...