Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
493User Manual 1802.3369.02 ─ 02
17.9.1 Common trigger settings
TRIGger:MEVents:MODE............................................................................................... 493
TRIGger:EVENt<ev>:TYPE.............................................................................................493
TRIGger:EVENt<ev>:LEVel<n>[:VALue]...........................................................................493
TRIGger:FINDlevel.........................................................................................................494
TRIGger:EVENt<ev>:SOURce........................................................................................ 494
TRIGger:MEVents:MODE <Class>
Trigger on single event is the only supported mode.
Parameters:
<Class> SINGle
*RST: SINGle
Usage: Asynchronous command
Manual operation: See "Trigger on" on page 136
TRIGger:EVENt<ev>:TYPE <Type>
Selects the trigger type.
Suffix:
<ev>
.
1, can be omitted
Parameters:
<Type> EDGE | GLITch | WIDTh | RUNT | WINDow | TIMeout | INTerval |
SLEWrate | ANEDge
ANEDge = analog edge trigger is the only trigger type if the
extern trigger source is used.
*RST: EDGE
Usage: Asynchronous command
Manual operation: See "Type" on page 136
TRIGger:EVENt<ev>:LEVel<n>[:VALue] <Level>
Sets the trigger level for the specified event and source (channel).
If the trigger source is serial bus, the trigger level is set by the thresholds in the proto-
col configuration.
Suffix:
<ev>
.
1, can be omitted
<n> 1 to 8, depending on instrument model. Index of the analog
channel.
Trigger
Loading ...
Loading ...
Loading ...