Loading ...
Loading ...
Loading ...
Measurements
R&S
®
MXO 5 Series
191User Manual 1802.3369.02 ─ 02
Remote command:
CURSor<cu>:SIAD on page 582
Show label
Shows the cursor labels in the diagram.
Remote command:
CURSor<cu>:LABel on page 582
Show values
Displays the values of the labels.
Vertical cursor 1, Vertical cursor 2
Defines a label to be displayed with the vertical cursors.
By default, the cursors are labeled as Cu1.1, Cu1.2, Cu2.1, Cu2.2.
Horizontal cursor 1, Horizontal cursor 2
Defines a label to be displayed with the horizontal cursors.
9.1.3.3 Peak search tab
Access: [Cursor] key > "Peak search" tab
The settings on this tab are only available in spectrum mode, i.e. the source of the cur-
sor measurement is a spectrum. In this case, the cursors can indicate the results of a
peak search on the waveform. You can define which peaks the instrument determines
by defining the noise reject settings.
Absolute peak
Sets both cursors to the absolute peak value.
Cursor measurements
Loading ...
Loading ...
Loading ...