Loading ...
Loading ...
Loading ...
Getting Started
R&S
®
MXO 5 Series
32User Manual 1802.3369.02 ─ 02
Demo
The pins are intended for demonstration purposes.
Logic Channels
Two connectors for logical probes with 8 digital channels each (D0 to D7 and D8 to
D15). Using logic channels requires the Mixed Signal Option R&S MXO5-B1.
The maximum input voltage is 40 V (Vp) at 100 kΩ input impedance. The maximum
input frequency for a signal with the minimum input voltage swing and medium hystere-
sis of 800 mV (Vpp) is 400 MHz.
USB
Three USB 3.1 gen1 interfaces of type A. They are used to connect a mouse or key-
board, a USB flash drive for storing and reloading instrument settings and measure-
ment data, and to update the firmware.
Probe Comp.
Probe compensation terminal to adjust passive probes to the input channel.
Square wave signal for probe compensation.
Ground connector for probes.
3.2.2 Side view
On the side of the instrument, you can find the computer connectors and the ground
connector for probes.
Instrument tour
Loading ...
Loading ...
Loading ...