Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
456User Manual 1802.3369.02 ─ 02
Manual operation: See "Brightness" on page 87
DISPlay:BACKlight:DIMMing <UsrActivityTout>
Selects a time, after which the monitor brightness is reduced, if the instrument was
inactive. Remote control of the instrument is also considered as an activity.
Parameters:
<UsrActivityTout> OFF | T1Minute | T2Minutes | T3Minutes | T5Minutes |
T10Minutes | T15Minutes | T20Minutes | T25Minutes |
T30Minutes | T45Minutes | T1Hour | T2Hours | T3Hours |
T4Hours
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Dimm on user inactivity" on page 87
17.7.5.4 Clear results
DISPlay:CLR
Deletes all measurement results including all waveforms and statistics.
Usage:
Setting only
Asynchronous command
Manual operation: See "Clear" on page 58
17.7.5.5 Save/Recall
Autonaming
MMEMory:AUTonaming:PREFix...................................................................................... 456
MMEMory:AUTonaming:TIME......................................................................................... 456
MMEMory:AUTonaming:INDex........................................................................................ 456
MMEMory:AUSave:ENABle............................................................................................ 457
MMEMory:AUSave:INTerval............................................................................................457
MMEMory:AUTonaming:USERtext...................................................................................457
MMEMory:AUTonaming:DEFaultpath............................................................................... 458
MMEMory:AUTonaming:RESall....................................................................................... 458
MMEMory:AUTonaming:RESPath....................................................................................458
MMEMory:AUTonaming:TEXT.........................................................................................458
MMEMory:AUTonaming:PREFix <MainNmeStemSt>
MMEMory:AUTonaming:TIME <DateTime>
MMEMory:AUTonaming:INDex <NameIndex>
Includes or excludes the prefix/ date/time /index in the filename pattern for automatic
filename generation. This name is used as the default filename.
Instrument setup
Loading ...
Loading ...
Loading ...