Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
652User Manual 1802.3369.02 ─ 02
SBUS<sb>:SPI:MISO:THReshold <Threshold>
Sets a user-defined threshold value for the line.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Threshold>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 296
SBUS<sb>:SPI:MOSI:HYSTeresis
<Hysteresis>
Sets a value for the hysteresis for the MOSI channel.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Hysteresis>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 296
SBUS<sb>:SPI:MOSI:POLarity <MOSIPolarity>
Selects if the transmitted signal for the respective line is active high (high = 1) or active
low (low = 1).
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<MOSIPolarity> ACTLow | ACTHigh
*RST: ACTHigh
Usage: Asynchronous command
Manual operation: See "Polarity: MOSI, MISO, CS" on page 296
SBUS<sb>:SPI:MOSI:SOURce MOSISource
Sets the input channel of the MOSI line.
Suffix:
<sb>
.
1...4, index of the serial bus
Protocols
Loading ...
Loading ...
Loading ...