Loading ...
Loading ...
Loading ...
Getting Started
R&S
®
MXO 5 Series
28User Manual 1802.3369.02 ─ 02
3.1.7 Connecting to LAN
For remote operation of the instrument using a computer, you need a local area net-
work (LAN) connection.
Network environment
Before connecting the product to a LAN, consider the following:
●
Install the latest firmware to reduce security risks.
●
For internet or remote access, use secured connections if applicable.
●
Ensure that the network settings comply with the security policies of your company.
Contact your local system administrator or IT department before connecting your
product to your company LAN.
●
When connected to the LAN, the product may potentially be accessed from the
internet, which may be a security risk. For example, attackers might misuse or
damage the product.
To connect a LAN cable
► Connect an RJ-45 cable to the LAN connector on the rear panel, and to the LAN.
For supported LAN interfaces, refer to the data sheet.
By default, the R&S MXO 5 is configured to use DHCP. Configuration of a static IP
address is not required.
3.1.8 Connecting external devices
3.1.8.1 Connecting USB devices
You can use USB connectors on the front panel and on the side or rear panel to con-
nect various devices:
●
Connect a keyboard and a mouse for operation and data entry, alternatively or in
addition to the touchscreen functionality.
●
Connect USB flash drives to save screenshots, and to transfer files to and from the
instrument without a network connection.
► Connect the USB device to any of the USB connectors.
You can connect or disconnect USB devices during operation of the instrument.
3.1.8.2 Connecting external monitors
Using the HDMI or DisplayPort connector on the side panel, you can connect one
external monitor or projector to the oscilloscope. The display connectors are not plug &
play, the monitor is recognized by the instrument during the boot process.
Preparing for use
Loading ...
Loading ...
Loading ...