Loading ...
Loading ...
Loading ...
Acquisition and waveform setup
R&S
®
MXO 5 Series
115User Manual 1802.3369.02 ─ 02
Show channel
Switches the selected channel signal on or off.
The signal icon opens on the signal bar. The waveform of the last acquisition is dis-
played in the diagram.
Remote command:
CHANnel<ch>:STATe on page 464
Vertical scale
Sets the vertical scale, which defines the displayed amplitude of the selected wave-
form.
The unit depends on the connected probe.
The current value is shown in the signal icon. Vertical scale directly affects the resolu-
tion of the waveform amplitude. To get the best resolution of the ADC, set the wave-
forms to cover most of the height of the diagram.
Remote command:
CHANnel<ch>:SCALe on page 465
Offset
Sets the offset voltage, which corrects an offset-affected signal. The vertical center of
the selected channel is shifted by the offset value and the signal is repositioned within
the diagram.
Vertical setup
Loading ...
Loading ...
Loading ...