Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
557User Manual 1802.3369.02 ─ 02
HCOPy:SSD <ShwSetDialogScpi>
If enabled, the currently open dialog box is included in the screenshot.
Parameters:
<ShwSetDialogScpi> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Show setup dialog" on page 282
HCOPy:WBKG
<WhiteBackground>
Inverts the background color, so you can picture waveforms with normal waveform col-
ors on white background.
If both HCOPy:WBKG and HCOPy:DEVice<m>:INVerse are ON, the instrument
inverts the background twice, and it appears black.
Parameters:
<WhiteBackground> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "White background" on page 282
17.12 Automatic measurements
This chapter contains all remote commands to set up automatic measurements and to
analyze the measurement results.
Measurement suffix <mg>
The suffix <mg> indicates the number of the measurement, for which the command
takes effect.
17.12.1 General settings
MEASurement<mg>:COUNt?..........................................................................................558
MEASurement<mg>[:ENABle].........................................................................................558
MEASurement<mg>:SOURce......................................................................................... 558
MEASurement<mg>:FSRC............................................................................................. 558
MEASurement<mg>:SSRC............................................................................................. 559
MEASurement<mg>:MAIN..............................................................................................559
MEASurement<mg>:ENVSelect...................................................................................... 559
Automatic measurements
Loading ...
Loading ...
Loading ...