Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
457User Manual 1802.3369.02 ─ 02
The prefix indicates the type of data that is saved, for example, RefCurve, Settings.
Parameters:
<NameIndex> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Index" on page 97
MMEMory:AUSave:ENABle <EnableAutosave>
Enables the automatic saving of the waveform. You can set the autosave interval with
MMEMory:AUSave:INTerval.
Parameters:
<EnableAutosave> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Enable autosave" on page 97
MMEMory:AUSave:INTerval <AutosaveIntvl>
Defines the time interval for the automatic saving of the waveform, if MMEMory:
AUSave:ENABle is set to ON.
Parameters:
<AutosaveIntvl> Range: 1 to 360000
Increment: 1
*RST: 300
Default unit: s
Usage: Asynchronous command
Manual operation: See "Enable autosave" on page 97
MMEMory:AUTonaming:USERtext <NmeStringSt>
If enabled, inserts the specified user text after the prefix.
You can define the text with MMEMory:AUTonaming:TEXT.
Parameters:
<NmeStringSt> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "User text" on page 96
Instrument setup
Loading ...
Loading ...
Loading ...