Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
464User Manual 1802.3369.02 ─ 02
ACQuire:ROLLmode:POINts?
Returns the record length of the roll mode. In roll mode, the complete record is always
captured, independently of the displayed waveform. To process and analyze the com-
plete roll waveform, enable ACQuire:ROLLmode:OSCapture.
Return values:
<RecordLength> Range: 0 to 18446744073709551615
Increment: 1
*RST: 0
Default unit: pts
Usage: Query only
Asynchronous command
Manual operation: See "Off screen capture" on page 103
TIMebase:ROLL:STATe?
Returns the status of the roll mode.
Return values:
<State> ON | OFF
*RST: OFF
Usage: Query only
Asynchronous command
Manual operation: See "Mode" on page 103
17.8.4 Vertical setup
The channel suffix <ch> selects the input channel that is affected by the command.
CHANnel<ch>:STATe..................................................................................................... 464
CHANnel<ch>:SCALe.................................................................................................... 465
CHANnel<ch>:RANGe................................................................................................... 465
CHANnel<ch>:OFFSet................................................................................................... 465
CHANnel<ch>:POSition..................................................................................................466
CHANnel<ch>:COUPling................................................................................................ 466
CHANnel<ch>:INVert......................................................................................................467
CHANnel<ch>:SKEW:TIME.............................................................................................467
CHANnel<ch>:BANDwidth.............................................................................................. 468
CHANnel<ch>:EATScale................................................................................................ 468
CHANnel<ch>:EATTenuation...........................................................................................468
CHANnel<ch>:IMPedance.............................................................................................. 469
CHANnel<ch>:STATe <State>
Switches the selected channel signal on or off.
Acquisition and setup
Loading ...
Loading ...
Loading ...