Loading ...
Loading ...
Loading ...
Instrument setup
R&S
®
MXO 5 Series
93User Manual 1802.3369.02 ─ 02
Date, Time, Overall alignment state
Show the date, time and the summary result of the self-alignment process: not aligned,
passed or failed. Detailed results are provided on the "Alignment results" tab.
Remote command:
CALibration:DATE? on page 459
CALibration:TIME? on page 459
CALibration:RESult? on page 459
Show results
Opens a dialog to display the alignment results.
For each channel, the results of the individual alignment steps are shown for all techni-
cal channel component. In case you require support, you may be asked to provide this
information.
5.7.2.2 Performing a self-alignment
The self-alignment aligns the data from several input channels vertically and horizon-
tally to synchronize the timebases, amplitudes and positions. The self-alignment proc-
ess includes a basic hardware check.
Recommendation on performing the self-alignment:
●
When putting the instrument into operation for the first time
●
After a firmware update
●
Once a week
●
When major temperature changes occur (> 5°)
Maintenance settings
Loading ...
Loading ...
Loading ...