Loading ...
Loading ...
Loading ...
Applications
R&S
®
MXO 5 Series
240User Manual 1802.3369.02 ─ 02
Auto scale
If enabled, the vertical scaling of input and output channel is done automatically for
every new measurement frequency point.
That guarantees a non-disturbed signal and a maximum of measurement resolution.
For Coupling = "DC", the channel offset is also changed to compensate the signal off-
set.
Remote command:
FRANalysis:AUToscale on page 604
11.1.3.4 Display
Access: [Apps] > "General" > "FRA" > "Display".
In this dialog, you can select which elements are displayed in the FRA diagram.
Display points
Enables the display of the measurement points for the frequency response analysis.
Remote command:
FRANalysis:MEASurement:POINt[:DISPlay] on page 606
Result table
Enables the display of the result table for the FRA.
Remote command:
FRANalysis:RESult:STATe on page 615
Markers
Enables the display of the marker table for the FRA.
Remote command:
FRANalysis:MARKer<m>:STATe on page 616
Margin
Enables the display of the margin table for the FRA.
Remote command:
FRANalysis:MARGin:STATe on page 615
Frequency response analysis (option R&S
MXO5-K36)
Loading ...
Loading ...
Loading ...