Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
507User Manual 1802.3369.02 ─ 02
TRIGger:EVENt<ev>:INTerval:SLOPe <Slope>
Sets the edge for the trigger. You can analyze the interval between positive edges or
between negative edges.
Suffix:
<ev>
.
1, can be omitted
Parameters:
<Slope> POSitive | NEGative | EITHer
*RST: POSitive
Usage: Asynchronous command
Manual operation: See "Slope" on page 149
TRIGger:EVENt<ev>:INTerval:WIDTh
<Width>
Sets the time between two pulses for the interval trigger.
Suffix:
<ev>
.
1, can be omitted
Parameters:
<Width> Range: 1E-10 to 10000
Increment: 1E-07
*RST: 5E-09
Default unit: s
Usage: Asynchronous command
Manual operation: See "Interv. width" on page 150
17.9.9 Slew rate trigger
TRIGger:EVENt<ev>:LEVel<n>:SLEW:LOWer..................................................................507
TRIGger:EVENt<ev>:LEVel<n>:SLEW:UPPer...................................................................508
TRIGger:EVENt<ev>:SLEW:DELTa..................................................................................508
TRIGger:EVENt<ev>:SLEW:RANGe................................................................................508
TRIGger:EVENt<ev>:SLEW:RATE...................................................................................509
TRIGger:EVENt<ev>:SLEW:SLOPe.................................................................................509
TRIGger:EVENt<ev>:LEVel<n>:SLEW:LOWer <Level>
Sets the lower voltage threshold. When the signal crosses this level, the slew rate
measurement starts or stops depending on the selected slope.
Suffix:
<ev>
.
1, can be omitted
<n> 1 to 8, depending on instrument model. Index of the analog
channel.
Trigger
Loading ...
Loading ...
Loading ...