Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
540User Manual 1802.3369.02 ─ 02
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<ScaleFactor> Range: -100000000 to 100000000
Increment: 0.1
*RST: 1
Usage: Asynchronous command
Manual operation: See "Scale factor" on page 182
REFCurve<rc>:RESCale:VERTical:OFFSet
<Offset>
The vertical offset moves the reference waveform vertically. Enter a value with the unit
of the waveform.
Like vertical offset of a channel waveform, the offset of a reference waveform is sub-
tracted from the measured value. Negative values shift the waveform up, positive val-
ues shift it down.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<Offset> Range: -100000000 to 100000000
Increment: 1E-06
*RST: 0
Default unit: V
Usage: Asynchronous command
Manual operation: See "Vertical offset" on page 182
REFCurve<rc>:RESCale:VERTical:STATe <State>
If enabled, the vertical offset and factor are applied to the reference waveform.
Stretching and offset change the display of the waveform independent of the vertical
scale and position.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Enable" on page 182
REFCurve<rc>:TOORiginal
Available, if REFCurve<rc>:VMODe is set to INDependent.
Waveform analysis
Loading ...
Loading ...
Loading ...