Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
491User Manual 1802.3369.02 ─ 02
HDEFinition:BWIDth <Bandwidth>
Sets the filter bandwidth for the high definition mode.
Parameters:
<Bandwidth> Range: 10000 to 2E+9
Increment: 1000
*RST: 100E+6
Default unit: Hz
Usage: Asynchronous command
Manual operation: See "Bandwidth" on page 112
HDEFinition:RESolution?
Displays the resulting vertical resolution in high definition mode. The higher the filter
bandwidth, the lower the resolution.
Return values:
<Resolution> Range: 0 to 18
Increment: 0.1
*RST: 0
Default unit: bit
Usage: Query only
Asynchronous command
Manual operation: See "Resolution in bits" on page 112
HDEFinition:STATe <State>
Enables high definition mode, which increases the numeric resolution of the waveform
signal.
Parameters:
<State> ON | OFF
ON: high definition mode
OFF: normal oscilloscope mode
*RST: OFF
Usage: Asynchronous command
Manual operation: See "State" on page 112
17.8.10 Reference clock
SENSe[:ROSCillator]:OUTPut[:ENABle] <ReferenceOutput>
Sends the internal reference clock signal to the Ref Out 10 MHz connector.
Acquisition and setup
Loading ...
Loading ...
Loading ...