Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 5 Series
328User Manual 1802.3369.02 ─ 02
Protocol type
Displays the protocol type to be decoded.
Remote command:
SBUS<sb>:TYPE on page 645
State
Enables the decoding of the selected bus. The signal icon of the bus appears on the
signal bar.
Source: Tx, Rx
Select the input channels for the transmitter and receiver signals.
Do not combine a reference waveform with channel or math waveform because the
time correlation of these waveforms might differ.
Remote command:
SBUS<sb>:UART:TX:SOURce on page 690
SBUS<sb>:UART:RX:SOURce on page 688
Bit order
Selects the bit order, which determines if the data of the messages starts with MSB
(most significant bit) or LSB (least significant bit).
Remote command:
SBUS<sb>:UART:BORDer on page 686
UART (option R&S
MXO5-K510)
Loading ...
Loading ...
Loading ...