Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
553User Manual 1802.3369.02 ─ 02
EXPort:WAVeform:STOP <Stop>
Sets the end time value of the waveform section for export, if EXPort:WAVeform:
SCOPe on page 551 is set to Manual.
Parameters:
<Stop> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: s
Usage: Asynchronous command
Manual operation: See "Export mode" on page 272
EXPort:WAVeform:GATE
Selects the gate to be used for limited data export if EXPort:WAVeform:SCOPe is set
to GATE.
Usage:
Asynchronous command
Manual operation: See "Export mode" on page 272
EXPort:WAVeform:CURSorset <Cursorset>
Sets the cursor set to be used for limited data export if EXPort:WAVeform:SCOPe is
set to CURSor.
Parameters:
<Cursorset> CURSOR1 | CURSor1 | CURSOR2 | CURSor2 | CURSOR3 |
CURSor3 | CURSOR4 | CURSor4
CURSORx = CURSorx
Usage: Asynchronous command
Manual operation: See "Export mode" on page 272
17.11.5 Results
EXPort:RESult:NAME.....................................................................................................553
EXPort:RESult:SAVE......................................................................................................554
EXPort:RESult:SELect:CURSor.......................................................................................554
EXPort:RESult:SELect:MEASurement..............................................................................554
EXPort:RESult:NAME <FilePath>
Sets the path, the filename and the file format of the export file.
Parameters:
<FilePath> String with path and file name with extension .csv.
Data management
Loading ...
Loading ...
Loading ...