Loading ...
Loading ...
Loading ...
Waveform analysis
R&S
®
MXO 5 Series
178User Manual 1802.3369.02 ─ 02
In the "Setup" tab, you select the target reference waveform and its source.
R1/2/3/4
Each tab contains the settings for one of the available reference waveforms.
Show
Enables the display of the reference waveform in the diagram.
Remote command:
REFCurve<rc>:STATe on page 536
Source
Selects the source waveform from the active waveforms, e.g. input channels, math
waveforms, or spectrum.
Remote command:
REFCurve<rc>:SOURce on page 536
Create/update
Copies the selected source waveform with all its settings to the memory of the refer-
ence waveform. If there is a previously defined reference waveform in this memory, it is
updated by the current source waveform. If the acquisition is running, the reference
waveform is a snapshot.
A progress bar informs you about the process, see "Progress information" on page 66.
Remote command:
REFCurve<rc>:UPDate on page 537
Clear
The selected reference waveform disappears, its memory is deleted.
Remote command:
REFCurve<rc>:CLEar on page 534
Save
Saves the reference waveform. The complete reference waveform is stored in a REF
file and can be reloaded later.
A progress bar informs you about the process, see "Progress information" on page 66.
If you want to save only a part of the waveform, or need CSV format, use "Menu" key >
"Save/Recall" key > "Save" tab > "Waveform".
See also:
●
Chapter 12.2, "Save and recall waveform data", on page 271
●
Chapter 12.2.3, "Waveform export files", on page 274
Remote command:
REFCurve<rc>:SAVE on page 536
To abort the saving, use REFCurve<rc>:ABORt on page 534.
Recall
Opens a file selection dialog box and loads the selected reference waveform file.
Reference waveforms
Loading ...
Loading ...
Loading ...