Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
496User Manual 1802.3369.02 ─ 02
Parameters:
<Filter> OFF | LFReject | RFReject
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Filter, Cut-off" on page 140
TRIGger:ANEDge:CUToff:HIGHpass <CutOffFreq>
Frequencies below the cutoff frequency are rejected, higher frequencies pass the filter.
Parameters:
<CutOffFreq> KHZ5 | KHZ50
KHZ5 = 5 kHz
KHZ50 = 50 kHz
*RST: KHZ50
Usage: Asynchronous command
Manual operation: See "Filter, Cut-off" on page 140
TRIGger:ANEDge:CUToff:LOWPass <CutOffFreq>
Frequencies higher than the cutoff frequency are rejected, lower frequencies pass the
filter.
Parameters:
<CutOffFreq> KHZ50 | MHZ50
KHZ50 = 50 kHz
MHZ50 = 50 MHz
*RST: KHZ50
Usage: Asynchronous command
Manual operation: See "Filter, Cut-off" on page 140
TRIGger:ANEDge:NREJect <NoiseReject>
Enables an automatic hysteresis on the trigger level to avoid unwanted trigger events
caused by noise.
Parameters:
<NoiseReject> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Trigger noise reject" on page 140
Trigger
Loading ...
Loading ...
Loading ...