Loading ...
Loading ...
Loading ...
Spectrum analysis
R&S
®
MXO 5 Series
225User Manual 1802.3369.02 ─ 02
Remote command:
CALCulate:SPECtrum<sp>:WAVeform:AVERage:ENABle on page 595
CALCulate:SPECtrum<sp>:WAVeform:AVERage:COUNt on page 595
CALCulate:SPECtrum<sp>:WAVeform:MAXimum:ENABle on page 595
CALCulate:SPECtrum<sp>:WAVeform:MINimum:ENABle on page 595
CALCulate:SPECtrum<sp>:WAVeform:NORMal[:ENABle] on page 596
Spectrum preset
Presets the spectrum measurement.
Remote command:
CALCulate:SPECtrum<sp>:PRESet on page 593
10.4 Spectrum scale
Access: "Menu" > "Spectrum" > "Scale".
Scale mode
By default, the vertical scale is adapted to the current measurement results automati-
cally to provide an optimal display. However, if necessary, you can define scaling val-
ues manually to suit your requirements.
Note: When you change the scaling values manually using the [Scale] rotary knob, the
scale mode is set to "Manual" temporarily.
"Manual"
Enter the required values for "Vertical maximum" and "Vertical range".
"Auto"
"Vertical maximum" is read-only.
Magnitude unit
Sets the unit for the y-axis.
Spectrum scale
Loading ...
Loading ...
Loading ...