Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
494User Manual 1802.3369.02 ─ 02
Parameters:
<Level> Range: -10 to 10
Increment: 0.001
*RST: 0
Default unit: V
Usage: Asynchronous command
Manual operation: See "Level" on page 137
TRIGger:FINDlevel
Sets the trigger level automatically to 0.5 * (MaxPeak – MinPeak).
Usage:
Event
Asynchronous command
Manual operation: See "Find level" on page 137
TRIGger:EVENt<ev>:SOURce
<SourceDetailed>
Selects the source of the trigger signal for the selected trigger event. The trigger
source works even if it is not displayed in a diagram.
All inputs can be used as trigger source.
Suffix:
<ev>
.
1, can be omitted
Parameters:
<SourceDetailed> C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 | EXTernanalog | LINE | D0
| D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 |
D13 | D14 | D15 | SBUS1 | SBUS2 | SBUS3 | SBUS4
*RST: C1
Usage: Asynchronous command
Manual operation: See "Source" on page 136
17.9.2 Edge trigger
TRIGger:EVENt<ev>:EDGE:SLOPe.................................................................................494
TRIGger:ANEDge:LEVel................................................................................................. 495
TRIGger:ANEDge:COUPling........................................................................................... 495
TRIGger:ANEDge:FILTer................................................................................................ 495
TRIGger:ANEDge:CUToff:HIGHpass................................................................................496
TRIGger:ANEDge:CUToff:LOWPass................................................................................ 496
TRIGger:ANEDge:NREJect.............................................................................................496
TRIGger:EVENt<ev>:EDGE:SLOPe <Slope>
Sets the edge direction for the trigger.
Trigger
Loading ...
Loading ...
Loading ...