Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
513User Manual 1802.3369.02 ─ 02
Usage: Asynchronous command
Manual operation: See "Holdoff mode" on page 154
TRIGger:HOLDoff:MIN <RandomMinTime>
Defines the lower limit for the random time holdoff, if TRIGger:HOLDoff:MODE
TRIGger:HOLDoff:MODETRIGger:HOLDoff:MODE is set to RANDom.
Parameters:
<RandomMinTime> Range: 1E-07 to 5
Increment: 0.0002
*RST: 0.001
Default unit: s
Usage: Asynchronous command
Manual operation: See "Holdoff mode" on page 154
TRIGger:HOLDoff:TIME
<Time>
Defines the holdoff time period, if TRIGger:HOLDoff:MODE is set to TIME. The next
trigger occurs only after this time has passed.
Parameters:
<Time> Range: 1E-07 to 10
Increment: 0.0002
*RST: 0.001
Default unit: s
Usage: Asynchronous command
Manual operation: See "Holdoff mode" on page 154
17.9.11 Hysteresis
TRIGger:NOISe<m>:ABSolute........................................................................................ 513
TRIGger:NOISe<m>:EFFective?..................................................................................... 514
TRIGger:NOISe<m>:MODE............................................................................................ 514
TRIGger:NOISe<m>:PERDivision....................................................................................514
TRIGger:NOISe<m>:RELative.........................................................................................515
TRIGger:NOISe<m>[:STATe]...........................................................................................515
TRIGger:NOISe<m>:ABSolute <Absolute>
Defines a range in absolute values around the trigger level. If the signal oscillates
inside this range and thus crosses the trigger level, no trigger event occurs.
Suffix:
<m>
.
1 to 8, depending on instrument model. Index of the analog
channel.
Trigger
Loading ...
Loading ...
Loading ...