Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 5 Series
367User Manual 1802.3369.02 ─ 02
LIN standard
Selects the version of the LIN standard that is used in the DUT. The setting mainly
defines the checksum version used during decoding.
The most common version is LIN v.2.x. For mixed networks, or if the standard is
unknown, set the LIN standard to "Auto".
Remote command:
SBUS<sb>:LIN:STANdard on page 735
Data
Sets the source waveform of the data line.
Remote command:
SBUS<sb>:LIN:DATA:SOURce on page 734
Polarity
Defines the idle state of the bus. The idle state is the recessive state and corresponds
to a logic high.
Remote command:
SBUS<sb>:LIN:POLarity on page 734
Bit rate
Sets the number of transmitted bits per second. The maximum bit rate for LIN is 20
kbit/s.
If the LIN standard is "J2602", the bit rate is 10.417 kbit/s and cannot be changed.
Remote command:
SBUS<sb>:LIN:BITRate on page 733
Threshold
Press "Set thresholds", to open the "Threshold setup" dialog.
Enter the value directly in the field of the threshold setup dialog.
Additional to the threshold, you can also set a hysteresis.
Remote command:
SBUS<sb>:LIN:DATA:THReshold on page 734
SBUS<sb>:LIN:DATA:HYSTeresis on page 734
LIN (option R&S
MXO5-K520)
Loading ...
Loading ...
Loading ...