Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
460User Manual 1802.3369.02 ─ 02
If a USB flash drive is connected, the report is saved on the USB flash drive. Other-
wise, the report is saved in the user data folder /home/storage/userData.
Usage: Event
Asynchronous command
Manual operation: See "Create report" on page 95
SYSTem:APUP <AutoPowerUp>
If enabled, the instrument powers up automatically when it is connected to the mains
voltage.
Parameters:
<AutoPowerUp> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Auto power up" on page 94
17.8 Acquisition and setup
17.8.1 Starting and stopping acquisition
RUNCont...................................................................................................................... 460
RUN............................................................................................................................. 460
RUNSingle.................................................................................................................... 460
SINGle..........................................................................................................................460
STOP........................................................................................................................... 461
RUNCont
RUN
Starts the continuous acquisition.
Usage:
Setting only
Asynchronous command
Manual operation: See "Run/Stop" on page 107
RUNSingle
SINGle
Starts a defined number of acquisition cycles. The number of cycles is set with
ACQuire:COUNt.
Usage:
Setting only
Asynchronous command
Acquisition and setup
Loading ...
Loading ...
Loading ...