Loading ...
Loading ...
Loading ...
Trigger
R&S
®
MXO 5 Series
157User Manual 1802.3369.02 ─ 02
LF reject BW
Sets the limit frequency limit for the highpass filter of the trigger signal. Frequencies
lower than this value are rejected, higher frequencies pass the filter.
Remote command:
TRIGger:LFReject on page 516
RF reject BW
Sets the limit frequency limit for the lowpass filter of the trigger signal. Frequencies
higher than this value are rejected, lower frequencies pass the filter.
Remote command:
TRIGger:RFReject on page 516
7.7 Actions on trigger
Access: "Menu" > "Trigger" > "Action" tab
The action settings define what happens when a trigger occurs. All available actions
can be initiated at the same time.
Trigger out
Selects, if a pulse is provided to the [Trigger Out] connector on the rear panel. The trig-
ger-out signal is used to synchronize the measurements of other instruments.
To adjust the outgoing signal, tap "Set trigger out".
Remote command:
TRIGger:ACTions:OUT:STATe on page 516
Set trigger out
Opens a dialog to adjust the trigger out pulse.
Actions on trigger
Loading ...
Loading ...
Loading ...