Loading ...
Loading ...
Loading ...
Trigger
R&S
®
MXO 5 Series
136User Manual 1802.3369.02 ─ 02
Depending on the trigger type, additional settings are available. They are explained in
the trigger-type specific sections.
Trigger on....................................................................................................................136
Source.........................................................................................................................136
Type............................................................................................................................ 136
Level............................................................................................................................137
Find level.....................................................................................................................137
Trigger on
Trigger on single event is the only supported mode.
Remote command:
TRIGger:MEVents:MODE on page 493
Source
Selects the source of the trigger signal for the selected trigger event. The trigger
source works even if it is not displayed in a diagram.
All inputs can be used as trigger source.
The trigger source can be:
●
Channel <n>: an analog input channel
●
Extern: external analog signal connected to the external trigger input. For the exter-
nal trigger source, the analog edge trigger is available.
●
Line: The instrument generates the trigger from the AC power input and synchroni-
zes the signal to the AC power frequency. Use this source if you want to analyze
signals related to the power line frequency, such as lighting equipment and power
supply devices. For the line trigger source, the edge trigger type is available.
●
Digital channels D0 to D15, serial bus
Remote command:
TRIGger:EVENt<ev>:SOURce on page 494
Type
Selects the trigger type.
Common trigger settings
Loading ...
Loading ...
Loading ...