Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
606User Manual 1802.3369.02 ─ 02
FRANalysis:INPut[:SOURce] <InputChannel>
Sets the channel for the input signal of the DUT.
Parameters:
<InputChannel> C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8
*RST: C1
Usage: Asynchronous command
Manual operation: See "Input" on page 235
FRANalysis:MEASurement:DELay:STATe
<MeasDelay>
Enables the measurement delay. Set a measurement delay time with FRANalysis:
MEASurement:DELay[:TIME].
Parameters:
<MeasDelay> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Measurement delay, Delay time" on page 239
FRANalysis:MEASurement:DELay[:TIME] <MeasDelayTime>
Sets a time delay, that the system waits before measuring the next point of the plot.
This is helpful in systems that need more time to adapt to the new frequency, for exam-
ple if filters with significant time group delays are present.
Available, if FRANalysis:MEASurement:DELay:STATe = ON.
Parameters:
<MeasDelayTime> Range: 0 to 10
Increment: 0.001
*RST: 0
Default unit: s
Usage: Asynchronous command
Manual operation: See "Measurement delay, Delay time" on page 239
FRANalysis:MEASurement:POINt[:DISPlay] <Points>
Enables the display of the measurement points for the frequency response analysis.
Parameters:
<Points> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Display points" on page 240
Applications
Loading ...
Loading ...
Loading ...