Loading ...
Loading ...
Loading ...
Instrument setup
R&S
®
MXO 5 Series
71User Manual 1802.3369.02 ─ 02
Ensure that you do not use the IP address range 192.168.0.x to avoid internal address
conflict.
Setting up a manual IP address within this range is rejected by the firmware. If the
automatic DHCP server assigns an IP address within this range, the instrument is not
reachable from this network.
An error message is displayed, if the firmware detects an IP address error:
Device name
Indicates the currently defined device name. This value is required to configure the
instrument for work in a network.
NOTICE! Risk of network problems. Incorrect configuration of the device name can
create network problems. Consult your network administrator before changing the
name.
Remote command:
SYSTem:COMMunicate:NET[:HOSTname] on page 441
System settings
Loading ...
Loading ...
Loading ...