Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
536User Manual 1802.3369.02 ─ 02
Suffix:
<rc>
.
1...8, index of the reference waveform
Usage: Setting only
Asynchronous command
Manual operation: See "Restore settings" on page 180
REFCurve<rc>:SAVE
Saves the reference waveform to the file selected by REFCurve<rc>:NAME.
Suffix:
<rc>
.
1...8, index of the reference waveform
Usage: Event
Asynchronous command
Manual operation: See "Save" on page 178
REFCurve<rc>:SOURce <Source>
Selects the source waveform from the active waveforms, e.g. input channels, math
waveforms, or spectrum.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<Source> C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 | M1 | M2 | M3 | M4 | M5 |
M6 | M7 | M8 | R1 | R2 | R3 | R4 | R5 | R6 | R7 | R8 | SPEC-
MAXH1 | SPECMINH1 | SPECNORM1 | SPECAVER1
Source of the reference waveform.
Usage: Asynchronous command
Manual operation: See "Source" on page 178
REFCurve<rc>:STATe <State>
Enables the display of the reference waveform in the diagram.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Show" on page 178
Waveform analysis
Loading ...
Loading ...
Loading ...