Loading ...
Loading ...
Loading ...
Measurements
R&S
®
MXO 5 Series
215User Manual 1802.3369.02 ─ 02
Remote command:
MEASurement<mg>:TRACk:SCALe on page 576
Meas offset
Defines the offset of the track waveform. If "Auto Scale" is on, the current offset value
is displayed.
You can also select the track waveform and use the vertical [Position] knob to change
the offset.
Remote command:
MEASurement<mg>:TRACk:OFFSet on page 576
9.2.7.2 Examples of track usage
The examples in this section provide ideas on how you can use tracks for waveform
analysis.
Tracks with math functions
Figure 9-7: Tracks used in math functions
The example is set up as follows:
●
Waveform on channel 1
●
3 measurements on C1: positive duty cycle, period and positive pulse width
●
Enable track for each measurement: Track 1 (positive duty cycle), Track 2 (period),
Track 3 (positive pulse width)
●
Math1 = Trk1 * Trk2
●
Math2 = Math1 / 100
Automatic measurements
Loading ...
Loading ...
Loading ...