Loading ...
Loading ...
Loading ...
Trigger
R&S
®
MXO 5 Series
152User Manual 1802.3369.02 ─ 02
Remote command:
TRIGger:EVENt<ev>:LEVel<n>:SLEW:LOWer on page 507
Range
Selects how the time limit for the slew rate is defined. The time measurement starts
when the signal crosses the first trigger level - the upper or lower limit depending on
the selected slope. The measurement stops when the signal crosses the second level.
"Within"
Triggers on slew rates inside a given time range. The range is defined
by "Slew rate" and "±Delta".
"Outside"
Triggers on slew rates outside a given time range. The range defini-
tion is the same as for "Within" range.
"Shorter"
Triggers on slew rates shorter than the given "Slew rate" limit.
"Longer"
Triggers on slew rates longer than the given "Slew rate" limit.
Remote command:
TRIGger:EVENt<ev>:SLEW:RANGe on page 508
Slew rate
For the ranges "Within" and "Outside", the slew rate defines the center of a range
which is defined by the limits "±Delta".
For the ranges "Shorter" and "Longer", the slew rate defines the maximum and mini-
mum slew rate limits, respectively.
Remote command:
TRIGger:EVENt<ev>:SLEW:RATE on page 509
±Delta
Defines a time range around the given slew rate.
Remote command:
TRIGger:EVENt<ev>:SLEW:DELTa on page 508
7.3.10 Line trigger
Access: "Menu" > "Trigger" > "Setup" tab > "Source" = "Line"
The line trigger is an edge trigger that triggers on the AC power input and synchronizes
the signal to the AC power frequency. It is not a trigger type but rather a special trigger
source. Use the line source if you want to analyze signals related to the power line fre-
quency, such as lighting equipment and power supply devices.
Slope
Selects the rising or falling edges of the AC power input.
7.4 Trigger mode / holdoff
Access: "Trigger" menu > "Mode / holdoff" tab
Trigger mode / holdoff
Loading ...
Loading ...
Loading ...