Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
660User Manual 1802.3369.02 ─ 02
17.16.2.3 Trigger
Trigger commands for serial buses affect the current trigger source. Therefore, set the
trigger source to the required serial bus with TRIGger:EVENt<ev>:SOURce before
sending the bus-specific trigger commands.
TRIGger:SPI:TYPE........................................................................................................ 660
TRIGger:SPI:DMINpattern.............................................................................................. 660
TRIGger:SPI:DPOSition..................................................................................................660
TRIGger:SPI:FCONdition................................................................................................661
TRIGger:SPI:PALignment............................................................................................... 661
TRIGger:SPI:TYPE <Type>
Selects the trigger type for SPI analysis.
Parameters:
<Type> FRSTart | FRENd | MOSI | MISO
FRSTart
Triggers on the beginning of the frame.
FRENd
Triggers on the end of the frame.
MOSI
Triggers on a specified data pattern in that is expected on the
MOSI line.
MISO
Triggers on a specified data pattern in that is expected on the
MISO line.
*RST:
FRSTart
Usage: Asynchronous command
Manual operation: See "Type" on page 302
TRIGger:SPI:DMINpattern <DataPattern>
Specifies a data bit pattern, or sets the start value of a pattern range.
Parameters:
<DataPattern>
Usage: Asynchronous command
Manual operation: See "Data" on page 303
TRIGger:SPI:DPOSition <DataPosition>
Sets the number of bits or words to be ignored before the first bit or word of interest.
The effect is defined by TRIGger:SPI:PALignment.
Protocols
Loading ...
Loading ...
Loading ...