Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 5 Series
298User Manual 1802.3369.02 ─ 02
Frame condition
Defines the start of a frame. A frame contains a number of successive words, at least
one word.
"CS"
Start and end of the frame is defined by the active state of the sub
select signal.
"CLK timeout"
Defines a timeout on the clock line SCLK as limiter between two
frames. The timeout condition is used for SPI connections without a
CS line. Enter the minimum clock idle time in the field.
Remote command:
SBUS<sb>:SPI:FRCondition on page 649
Timeout
Sets the minimum clock idle time if a timeout on the clock line SCLK is used as limiter
between two frames.
See also: "Frame condition" on page 298.
Remote command:
SBUS<sb>:SPI:TIMeout on page 654
13.2.2.3 Display settings
For details about the display settings, see Chapter 13.1.3, "Display", on page 288.
13.2.2.4 Shortcuts
For details about the available shortcuts, see Chapter 13.1.6, "Shortcuts",
on page 290.
13.2.3 SPI filter
Access:[Apps] key > "Protocol" tab > "SPI" > "Filter" tab
SPI bus (option R&S MXO5-K510)
Loading ...
Loading ...
Loading ...