Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
700User Manual 1802.3369.02 ─ 02
SBUS<sb>:UART:WORD<w>:STATe?
Returns the status of the specified word.
Suffix:
<sb>
.
1...4, index of the serial bus
<w> index of the word
Return values:
<WordState> OK | BREak | STERror | SPERror | PRERror | INComplete
OK: the frame is valid.
BREak: stop bit error with 0x00 word
STERror: start error, incorrect start bit
SPERror: stop error, incorrect stop bit
PRERror: parity error, incorrect parity bit.
INComplete: The frame is not completely contained in the
acquisition. The acquired part of the frame is valid.
*RST: OK
Usage: Query only
Asynchronous command
SBUS<sb>:UART:WORD<w>:TXValue?
Returns the value of the specified word on the TX line.
Suffix:
<sb>
.
1...4, index of the serial bus
<w> index of the word
Return values:
<TxValue> Range: 0 to 511
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
17.16.5 CAN (option R&S MXO5-K520)
Before R&S MXO 5 can accept the specific bus commands, make sure that:
●
The decoding of the specified bus is enabled with SBUS<sb>[:STATe].
●
The bus is set to the correct type with SBUS<sb>:TYPE.
● Configuration.........................................................................................................701
● Trigger...................................................................................................................706
● Filter...................................................................................................................... 715
● Decode results...................................................................................................... 719
Protocols
Loading ...
Loading ...
Loading ...