Loading ...
Loading ...
Loading ...
Spectrum analysis
R&S
®
MXO 5 Series
227User Manual 1802.3369.02 ─ 02
Remote command:
CALCulate:SPECtrum<sp>:GATE:STARt on page 596
Stop
Sets the end value for the gate.
Remote command:
CALCulate:SPECtrum<sp>:GATE:STOP on page 597
Position
Sets the position of the displayed frequency range.
The width of the gate is defined using the "Width" setting.
Remote command:
CALCulate:SPECtrum<sp>:GATE:POSition on page 596
Width
Defines the width of the displayed gate.
The position of the span is defined using the "Position" setting.
Remote command:
CALCulate:SPECtrum<sp>:GATE:WIDTh on page 597
10.6 Spectrum peak list
A peak list measurement detects all peaks above a user-definable threshold and
optionally indicates the peaks in the spectrum diagram.
Access: "Menu" > "Spectrum" > "PeakList".
In the peak list dialog, you can define various criteria for a peak search. The peaks can
be indicated in the frequency diagram by peak boxes, and the measured peak frequen-
cies and magnitudes are listed in the peak list table.
Spectrum peak list
Loading ...
Loading ...
Loading ...