Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 5 Series
312User Manual 1802.3369.02 ─ 02
Make sure that the tab of the correct serial bus is selected.
Protocol type
Displays the protocol type to be decoded.
Remote command:
SBUS<sb>:TYPE on page 645
State
Enables the decoding of the selected bus. The signal icon of the bus appears on the
signal bar.
SDA source
Sets the source channel to which the data line is connected.
Remote command:
SBUS<sb>:I2C:SDA:SOURce on page 668
SCL source
Selects the source channel to which the clock line is connected.
Remote command:
SBUS<sb>:I2C:SCL:SOURce on page 667
Threshold
Press "Set thresholds", to open the "Threshold setup" dialog.
Enter the value directly in the field of the threshold setup dialog.
Additional to the threshold, you can also set a hysteresis.
I²C (option R&S MXO5-K510)
Loading ...
Loading ...
Loading ...