Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 5 Series
356User Manual 1802.3369.02 ─ 02
Remote command:
TRIGger:CAN:XDATa:SDT:CONDition on page 713
TRIGger:CAN:XDATa:SDT:MAX on page 713
TRIGger:CAN:XDATa:SDT:MIN on page 714
VCID
Specifies a value or a range for the virtual CAN network ID (VCID).
"Condition"
Sets the comparison condition to a specific value or a range.
"Value"/"From"
Specifies the value or sets the start value of a range.
"To"
Sets the maximum value of a range for "Condition" = "In range"/"Out
of range".
Remote command:
TRIGger:CAN:XDATa:VCID:CONDition on page 714
TRIGger:CAN:XDATa:VCID:MAX on page 715
TRIGger:CAN:XDATa:VCID:MIN on page 715
AF
Specifies a value or a range for the CAN XL acceptance field (AF).
"Condition"
Sets the comparison condition to a specific value or a range.
"Value"/"From"
Specifies the value or sets the start value of a range.
"To"
Sets the maximum value of a range for "Condition" = "In range"/"Out
of range".
Remote command:
TRIGger:CAN:XDATa:AF:CONDition on page 712
TRIGger:CAN:XDATa:AF:MAX on page 713
TRIGger:CAN:XDATa:AF:MIN on page 713
SEC
Sets a value for the simple extended content (SEC) field. It indicates, if the CAN XL
data frame uses the CADsec protocol.
Remote command:
TRIGger:CAN:XDATa:SEC on page 714
Error conditions
If a CAN detects an error, it transmits an error flag at the next bit. The R&S MXO 5
detects errors in the message and triggers on these errors even if no CAN node sends
an error flag.
CAN (option R&S MXO5-K520)
Loading ...
Loading ...
Loading ...