Loading ...
Loading ...
Loading ...
Network operation and remote control
R&S
®
MXO 5 Series
417User Manual 1802.3369.02 ─ 02
Example: HiSLIP
IP address is 192.1.2.3: the valid resource string is: TCPIP::192.1.2.3::hislip0
Instrument name is RSRT1: the valid resource string is: TCPIP::RSRT1::hislip0.
DNS host name is MXO5-123456: the valid resource string is:
TCPIP::MXO5-123456::hislip0.
Example: VXI-11
IP address is 192.1.2.3: the valid resource string is: TCPIP::192.1.2.3
Instrument name is RSRT1: the valid resource string is: TCPIP::RSRT1.
DNS host name is MXO5-123456: the valid resource string is:
TCPIP::MXO5-123456.
16.4.2 Starting and stopping remote control
16.4.2.1 Starting a remote control session
When you switch on the instrument, it is always in manual operation state ("local"
state). It can be operated via the front panel, the touchscreen and external keyboard
and/or mouse.
► To start remote control:
● Send a command from the controller.
● VXI-11 protocol (LAN or USB interface): Use >R interface message.
While remote control is active, the instrument settings are optimized for maximum
measurement speed; the display is switched off. Operation via the front panel is dis-
abled.
On the touchscreen, two buttons appear in the upper left corner: "Local" and "View".
16.4.2.2 Using the display during remote control
You can observe the screen while a remote control script is executed. Displaying the
results of script execution is helpful for program test purposes but tends to slow down
the measurement. Therefore it is recommended that you switch off the display in real
measurement applications where a tested program script is to be executed repeatedly.
► To switch on the display, do one of the following:
● Tap the "View" button in the upper left corner of the touchscreen.
● Use the SYSTem:DISPlay:UPDate ON command.
► To switch off the display, do one of the following:
● Tap the "View" button again.
Remote control
Loading ...
Loading ...
Loading ...