Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 5 Series
343User Manual 1802.3369.02 ─ 02
XL sample point
Sets the position of the sample point within the bit in percent of the nominal bit time for
the CAN XL frame.
Remote command:
SBUS<sb>:CAN:XDATa:SAMPlepoint on page 704
Threshold
Press "Set thresholds", to open the "Threshold setup" dialog.
Enter the value directly in the field of the threshold setup dialog.
Additional to the threshold, you can also set a hysteresis.
Remote command:
SBUS<sb>:CAN:FAST:HYSTeresis on page 704
SBUS<sb>:CAN:FAST:THReshold on page 703
SBUS<sb>:CAN:SIC:HYSTeresis on page 703
SBUS<sb>:CAN:SIC:THReshold on page 703
Show threshold lines
If enabled, the threshold lines are displayed in the diagram.
The label of the threshold line is set according to the signal that it is referring to.
Remote command:
SBUS<m>:THReshold on page 646
13.5.1.2 Display settings
For details about the display settings, see Chapter 13.1.3, "Display", on page 288.
CAN (option R&S
MXO5-K520)
Loading ...
Loading ...
Loading ...