Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
690User Manual 1802.3369.02 ─ 02
SBUS<sb>:UART:TOUT <Timeout>
Sets the timeout between packets in a UART data stream. A new packet starts with the
first start bit after the timeout.
The command is relevant if SBUS<sb>:UART:PACKets is set to TOUT.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Timeout> Range: 1E-06 to 1
Increment: 1
*RST: 0.000625
Default unit: s
Usage: Asynchronous command
Manual operation: See "Packets" on page 329
SBUS<sb>:UART:TX:HYSTeresis
<Tx hysteresis>
Sets the hysteresis for the TX line.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Tx hysteresis>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 330
SBUS<sb>:UART:TX:SOURce TXSource
Selects the input channel for the transmitter signal.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
TXSource C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 | D0 | D1 | D2 | D3 | D4 | D5
| D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15 | M1 | M2
| M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4 | R5 | R6 | R7 |
R8
Usage: Asynchronous command
Manual operation: See "Source: Tx, Rx" on page 328
SBUS<sb>:UART:TX:THReshold <Tx threshold>
Sets a user-defined threshold value for the Tx line.
Protocols
Loading ...
Loading ...
Loading ...